/*
 * Copyright (c) 2004, 2005 Topspin Communications.  All rights reserved.
 * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies.
 * All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the
 * OpenIB.org BSD license below:
 *
 *     Redistribution and use in source and binary forms, with or
 *     without modification, are permitted provided that the following
 *     conditions are met:
 *
 *      - Redistributions of source code must retain the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer.
 *
 *      - Redistributions in binary form must reproduce the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer in the documentation and/or other materials
 *        provided with the distribution.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#pragma once

#include <linux/mlx4/cmd.h>
#include <linux/mlx4/device.h>

#define MLX4_NUM_UP 8
#define MLX4_NUM_TC 8

/* Default supported priorities for VPP allocation */
#define MLX4_DEFAULT_QOS_PRIO (0)

/* Derived from FW feature definition, 0 is the default vport fo all QPs */
#define MLX4_VPP_DEFAULT_VPORT (0)

struct mlx4_vport_qos_param {
	uint32_t bw_share;
	uint32_t max_avg_bw;
	uint8_t enable;
};

/**
 * mlx4_SET_PORT_PRIO2TC - This routine maps user priorities to traffic
 * classes of a given port and device.
 *
 * @dev: mlx4_dev.
 * @port: Physical port number.
 * @prio2tc: Array of TC associated with each priorities.
 *
 * Returns 0 on success or a negative mlx4_core errno code.
 **/
int mlx4_SET_PORT_PRIO2TC(struct mlx4_dev *dev, uint8_t port,
			  uint8_t *prio2tc);

/**
 * mlx4_SET_PORT_SCHEDULER - This routine configures the arbitration between
 * traffic classes (ETS) and configured rate limit for traffic classes.
 * tc_tx_bw, pg and ratelimit are arrays where each index represents a TC.
 * The description for those parameters below refers to a single TC.
 *
 * @dev: mlx4_dev.
 * @port: Physical port number.
 * @tc_tx_bw: The percentage of the bandwidth allocated for traffic class
 *  within a TC group. The sum of the bw_percentage of all the traffic
 *  classes within a TC group must equal 100% for correct operation.
 * @pg: The TC group the traffic class is associated with.
 * @ratelimit: The maximal bandwidth allowed for the use by this traffic class.
 *
 * Returns 0 on success or a negative mlx4_core errno code.
 **/
int mlx4_SET_PORT_SCHEDULER(struct mlx4_dev *dev, uint8_t port,
			    uint8_t *tc_tx_bw,
			    uint8_t *pg, uint16_t *ratelimit);
/**
 * mlx4_ALLOCATE_VPP_get - Query port VPP availible resources and allocation.
 * Before distribution of VPPs to priorities, only availible_vpp is returned.
 * After initialization it returns the distribution of VPPs among priorities.
 *
 * @dev: mlx4_dev.
 * @port: Physical port number.
 * @availible_vpp: Pointer to variable where number of availible VPPs is stored
 * @vpp_p_up: Distribution of VPPs to priorities is stored in this array
 *
 * Returns 0 on success or a negative mlx4_core errno code.
 **/
int mlx4_ALLOCATE_VPP_get(struct mlx4_dev *dev, uint8_t port,
			  uint16_t *availible_vpp, uint8_t *vpp_p_up);
/**
 * mlx4_ALLOCATE_VPP_set - Distribution of VPPs among differnt priorities.
 * The total number of VPPs assigned to all for a port must not exceed
 * the value reported by availible_vpp in mlx4_ALLOCATE_VPP_get.
 * VPP allocation is allowed only after the port type has been set,
 * and while no QPs are open for this port.
 *
 * @dev: mlx4_dev.
 * @port: Physical port number.
 * @vpp_p_up: Allocation of VPPs to different priorities.
 *
 * Returns 0 on success or a negative mlx4_core errno code.
 **/
int mlx4_ALLOCATE_VPP_set(struct mlx4_dev *dev, uint8_t port,
			  uint8_t *vpp_p_up);

/**
 * mlx4_SET_VPORT_QOS_get - Query QoS proporties of a Vport.
 * Each priority allowed for the Vport is assigned with a share of the BW,
 * and a BW limitation. This commands query the current QoS values.
 *
 * @dev: mlx4_dev.
 * @port: Physical port number.
 * @vport: Vport id.
 * @out_param: Array of mlx4_vport_qos_param that will contain the values.
 *
 * Returns 0 on success or a negative mlx4_core errno code.
 **/
int mlx4_SET_VPORT_QOS_get(struct mlx4_dev *dev, uint8_t port, uint8_t vport,
			   struct mlx4_vport_qos_param *out_param);

/**
 * mlx4_SET_VPORT_QOS_set - Set QoS proporties of a Vport.
 * QoS parameters can be modified at any time, but must be initialized
 * before any QP is associated with the VPort.
 *
 * @dev: mlx4_dev.
 * @port: Physical port number.
 * @vport: Vport id.
 * @out_param: Array of mlx4_vport_qos_param which holds the requested values.
 *
 * Returns 0 on success or a negative mlx4_core errno code.
 **/
int mlx4_SET_VPORT_QOS_set(struct mlx4_dev *dev, uint8_t port, uint8_t vport,
			   struct mlx4_vport_qos_param *in_param);