|  | /* Copyright (c) 2009,13 The Regents of the University of California | 
|  | * Barret Rhoden <brho@cs.berkeley.edu> | 
|  | * Kevin Klues <klueska@cs.berkeley.edu> | 
|  | * See LICENSE for details. | 
|  | * | 
|  | * Multiboot parsing and helper functions. */ | 
|  |  | 
|  | #include <multiboot.h> | 
|  | #include <ros/common.h> | 
|  | #include <arch/mmu.h> | 
|  | #include <arch/arch.h> | 
|  | #include <ros/memlayout.h> | 
|  | #include <stdio.h> | 
|  | #include <pmap.h> | 
|  |  | 
|  | #ifdef CONFIG_X86 | 
|  | #include <arch/apic.h> | 
|  | #endif | 
|  |  | 
|  | /* Misc dead code to read from mboot.  We'll need to do this to run a legit | 
|  | * initrd from grub (module /initramfs.cpio, or whatever). */ | 
|  | static void mboot_parsing(struct multiboot_info *mbi) | 
|  | { | 
|  | if (mbi->flags & MULTIBOOT_INFO_BOOTDEV) | 
|  | printk("MBI: boot_device = 0x%08x\n", mbi->boot_device); | 
|  | if (mbi->flags & MULTIBOOT_INFO_CMDLINE) | 
|  | printk("MBI: command line: %s\n", | 
|  | (char*)((physaddr_t)mbi->cmdline + KERNBASE)); | 
|  | if (mbi->flags & MULTIBOOT_INFO_MODS) { | 
|  | printk("MBI: nr mods, %d: mods addr %p\n", mbi->mods_count, | 
|  | mbi->mods_addr); | 
|  | } | 
|  | } | 
|  |  | 
|  | bool mboot_has_mmaps(struct multiboot_info *mbi) | 
|  | { | 
|  | return mbi->flags & MULTIBOOT_INFO_MEM_MAP; | 
|  | } | 
|  |  | 
|  | /* This only notices bios detectable memory - there's a lot more in the higher | 
|  | * paddrs. */ | 
|  | void mboot_detect_memory(struct multiboot_info *mbi) | 
|  | { | 
|  | physaddr_t max_bios_mem; | 
|  | physaddr_t max_bios_addr; | 
|  | size_t basemem; | 
|  | size_t extmem; | 
|  | if (!(mbi->flags & MULTIBOOT_INFO_MEMORY)) { | 
|  | printk("No BIOS memory info from multiboot, crash impending\n"); | 
|  | return; | 
|  | } | 
|  | /* mem_lower and upper are measured in KB.  They are 32 bit values, so | 
|  | * we're limited to 4TB total. */ | 
|  | basemem = ROUNDDOWN((size_t)mbi->mem_lower * 1024, PGSIZE); | 
|  | /* On 32 bit, This shift << 10 could cause us to lose some memory, but | 
|  | * we weren't going to access it anyways (won't go beyond ~1GB) */ | 
|  | extmem = ROUNDDOWN((size_t)mbi->mem_upper * 1024, PGSIZE); | 
|  | /* Calculate the maximum physical address based on whether or not there | 
|  | * is any extended memory. */ | 
|  | if (extmem) { | 
|  | max_bios_mem = EXTPHYSMEM + extmem; | 
|  | /* On 32 bit, if we had enough RAM that adding a little wrapped | 
|  | * us around, we'll back off a little and run with just extmem | 
|  | * amount (in essence, subtracing 1MB). */ | 
|  | if (max_bios_mem < extmem) | 
|  | max_bios_mem = extmem; | 
|  | } else { | 
|  | max_bios_mem = basemem; | 
|  | } | 
|  | max_bios_addr = MIN(max_bios_mem, KERN_VMAP_TOP - KERNBASE); | 
|  | printk("Base memory: %luK, Extended memory: %luK\n", basemem / 1024, | 
|  | extmem / 1024); | 
|  | printk("Maximum directly addressable base and extended memory: %luK\n", | 
|  | max_bios_addr / 1024); | 
|  | /* Take a first stab at the max pmem, in case there are no memory | 
|  | * mappings (like in riscv) */ | 
|  | max_pmem = max_bios_mem; | 
|  | } | 
|  |  | 
|  | void mboot_foreach_mmap(struct multiboot_info *mbi, mboot_foreach_t func, | 
|  | void *data) | 
|  | { | 
|  | struct multiboot_mmap_entry *mmap_b, *mmap_e, *mmap_i; | 
|  | if (!mboot_has_mmaps(mbi)) { | 
|  | printd("No memory mapping info from multiboot\n"); | 
|  | return; | 
|  | } | 
|  | mmap_b = (struct multiboot_mmap_entry*)((size_t)mbi->mmap_addr + | 
|  | KERNBASE); | 
|  | mmap_e = (struct multiboot_mmap_entry*)((size_t)mbi->mmap_addr + | 
|  | KERNBASE + mbi->mmap_length); | 
|  | printd("mmap_addr = %p, mmap_length = %p\n", mbi->mmap_addr, | 
|  | mbi->mmap_length); | 
|  | /* Note when we incremement mmap_i, we add in the value of size... */ | 
|  | for (mmap_i = mmap_b; | 
|  | mmap_i < mmap_e; | 
|  | mmap_i = (struct multiboot_mmap_entry*)((void*)mmap_i + | 
|  | mmap_i->size + | 
|  | sizeof(mmap_i->size))) { | 
|  | func(mmap_i, data); | 
|  | } | 
|  | } | 
|  |  | 
|  | void mboot_print_mmap(struct multiboot_info *mbi) | 
|  | { | 
|  | void print_entry(struct multiboot_mmap_entry *entry, void *data) | 
|  | { | 
|  | printk("Base = 0x%016llx, Length = 0x%016llx : %s\n", | 
|  | entry->addr, entry->len, | 
|  | entry->type == MULTIBOOT_MEMORY_AVAILABLE ? "FREE" : | 
|  | "RESERVED"); | 
|  | } | 
|  | mboot_foreach_mmap(mbi, print_entry, 0); | 
|  | } | 
|  |  | 
|  | /* Given a range of memory, will tell us if multiboot is using anything we care | 
|  | * about in that range.  It usually uses memory below 1MB, so boot_alloc is | 
|  | * fine.  This is pre, so MBI is still a paddr. */ | 
|  | bool mboot_region_collides(struct multiboot_info *mbi, uintptr_t base, | 
|  | uintptr_t end) | 
|  | { | 
|  | if (regions_collide_unsafe((uintptr_t)mbi, (uintptr_t)mbi + | 
|  | sizeof(struct multiboot_info), base, end)) | 
|  | return TRUE; | 
|  | if (mboot_has_mmaps(mbi)) { | 
|  | if (regions_collide_unsafe((uintptr_t)mbi->mmap_addr + KERNBASE, | 
|  | (uintptr_t)mbi->mmap_addr + KERNBASE | 
|  | + mbi->mmap_length, base, end)) | 
|  | return TRUE; | 
|  | } | 
|  | return FALSE; | 
|  | } |