|  | /* | 
|  | * Copyright (c) 2006 Cisco Systems, Inc.  All rights reserved. | 
|  | * | 
|  | * This software is available to you under a choice of one of two | 
|  | * licenses.  You may choose to be licensed under the terms of the GNU | 
|  | * General Public License (GPL) Version 2, available from the file | 
|  | * COPYING in the main directory of this source tree, or the | 
|  | * OpenIB.org BSD license below: | 
|  | * | 
|  | *     Redistribution and use in source and binary forms, with or | 
|  | *     without modification, are permitted provided that the following | 
|  | *     conditions are met: | 
|  | * | 
|  | *      - Redistributions of source code must retain the above | 
|  | *        copyright notice, this list of conditions and the following | 
|  | *        disclaimer. | 
|  | * | 
|  | *      - Redistributions in binary form must reproduce the above | 
|  | *        copyright notice, this list of conditions and the following | 
|  | *        disclaimer in the documentation and/or other materials | 
|  | *        provided with the distribution. | 
|  | * | 
|  | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | 
|  | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | 
|  | * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | 
|  | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS | 
|  | * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN | 
|  | * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | 
|  | * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE | 
|  | * SOFTWARE. | 
|  | */ | 
|  |  | 
|  | #pragma once | 
|  |  | 
|  | #include <linux_compat.h> | 
|  |  | 
|  | enum { | 
|  | /* initialization and general commands */ | 
|  | MLX4_CMD_SYS_EN		 = 0x1, | 
|  | MLX4_CMD_SYS_DIS	 = 0x2, | 
|  | MLX4_CMD_MAP_FA		 = 0xfff, | 
|  | MLX4_CMD_UNMAP_FA	 = 0xffe, | 
|  | MLX4_CMD_RUN_FW		 = 0xff6, | 
|  | MLX4_CMD_MOD_STAT_CFG	 = 0x34, | 
|  | MLX4_CMD_QUERY_DEV_CAP	 = 0x3, | 
|  | MLX4_CMD_QUERY_FW	 = 0x4, | 
|  | MLX4_CMD_ENABLE_LAM	 = 0xff8, | 
|  | MLX4_CMD_DISABLE_LAM	 = 0xff7, | 
|  | MLX4_CMD_QUERY_DDR	 = 0x5, | 
|  | MLX4_CMD_QUERY_ADAPTER	 = 0x6, | 
|  | MLX4_CMD_INIT_HCA	 = 0x7, | 
|  | MLX4_CMD_CLOSE_HCA	 = 0x8, | 
|  | MLX4_CMD_INIT_PORT	 = 0x9, | 
|  | MLX4_CMD_CLOSE_PORT	 = 0xa, | 
|  | MLX4_CMD_QUERY_HCA	 = 0xb, | 
|  | MLX4_CMD_QUERY_PORT	 = 0x43, | 
|  | MLX4_CMD_SENSE_PORT	 = 0x4d, | 
|  | MLX4_CMD_HW_HEALTH_CHECK = 0x50, | 
|  | MLX4_CMD_SET_PORT	 = 0xc, | 
|  | MLX4_CMD_SET_NODE	 = 0x5a, | 
|  | MLX4_CMD_QUERY_FUNC	 = 0x56, | 
|  | MLX4_CMD_ACCESS_DDR	 = 0x2e, | 
|  | MLX4_CMD_MAP_ICM	 = 0xffa, | 
|  | MLX4_CMD_UNMAP_ICM	 = 0xff9, | 
|  | MLX4_CMD_MAP_ICM_AUX	 = 0xffc, | 
|  | MLX4_CMD_UNMAP_ICM_AUX	 = 0xffb, | 
|  | MLX4_CMD_SET_ICM_SIZE	 = 0xffd, | 
|  | MLX4_CMD_ACCESS_REG	 = 0x3b, | 
|  | MLX4_CMD_ALLOCATE_VPP	 = 0x80, | 
|  | MLX4_CMD_SET_VPORT_QOS	 = 0x81, | 
|  |  | 
|  | /*master notify fw on finish for slave's flr*/ | 
|  | MLX4_CMD_INFORM_FLR_DONE = 0x5b, | 
|  | MLX4_CMD_VIRT_PORT_MAP   = 0x5c, | 
|  | MLX4_CMD_GET_OP_REQ      = 0x59, | 
|  |  | 
|  | /* TPT commands */ | 
|  | MLX4_CMD_SW2HW_MPT	 = 0xd, | 
|  | MLX4_CMD_QUERY_MPT	 = 0xe, | 
|  | MLX4_CMD_HW2SW_MPT	 = 0xf, | 
|  | MLX4_CMD_READ_MTT	 = 0x10, | 
|  | MLX4_CMD_WRITE_MTT	 = 0x11, | 
|  | MLX4_CMD_SYNC_TPT	 = 0x2f, | 
|  |  | 
|  | /* EQ commands */ | 
|  | MLX4_CMD_MAP_EQ		 = 0x12, | 
|  | MLX4_CMD_SW2HW_EQ	 = 0x13, | 
|  | MLX4_CMD_HW2SW_EQ	 = 0x14, | 
|  | MLX4_CMD_QUERY_EQ	 = 0x15, | 
|  |  | 
|  | /* CQ commands */ | 
|  | MLX4_CMD_SW2HW_CQ	 = 0x16, | 
|  | MLX4_CMD_HW2SW_CQ	 = 0x17, | 
|  | MLX4_CMD_QUERY_CQ	 = 0x18, | 
|  | MLX4_CMD_MODIFY_CQ	 = 0x2c, | 
|  |  | 
|  | /* SRQ commands */ | 
|  | MLX4_CMD_SW2HW_SRQ	 = 0x35, | 
|  | MLX4_CMD_HW2SW_SRQ	 = 0x36, | 
|  | MLX4_CMD_QUERY_SRQ	 = 0x37, | 
|  | MLX4_CMD_ARM_SRQ	 = 0x40, | 
|  |  | 
|  | /* QP/EE commands */ | 
|  | MLX4_CMD_RST2INIT_QP	 = 0x19, | 
|  | MLX4_CMD_INIT2RTR_QP	 = 0x1a, | 
|  | MLX4_CMD_RTR2RTS_QP	 = 0x1b, | 
|  | MLX4_CMD_RTS2RTS_QP	 = 0x1c, | 
|  | MLX4_CMD_SQERR2RTS_QP	 = 0x1d, | 
|  | MLX4_CMD_2ERR_QP	 = 0x1e, | 
|  | MLX4_CMD_RTS2SQD_QP	 = 0x1f, | 
|  | MLX4_CMD_SQD2SQD_QP	 = 0x38, | 
|  | MLX4_CMD_SQD2RTS_QP	 = 0x20, | 
|  | MLX4_CMD_2RST_QP	 = 0x21, | 
|  | MLX4_CMD_QUERY_QP	 = 0x22, | 
|  | MLX4_CMD_INIT2INIT_QP	 = 0x2d, | 
|  | MLX4_CMD_SUSPEND_QP	 = 0x32, | 
|  | MLX4_CMD_UNSUSPEND_QP	 = 0x33, | 
|  | MLX4_CMD_UPDATE_QP	 = 0x61, | 
|  | /* special QP and management commands */ | 
|  | MLX4_CMD_CONF_SPECIAL_QP = 0x23, | 
|  | MLX4_CMD_MAD_IFC	 = 0x24, | 
|  | MLX4_CMD_MAD_DEMUX	 = 0x203, | 
|  |  | 
|  | /* multicast commands */ | 
|  | MLX4_CMD_READ_MCG	 = 0x25, | 
|  | MLX4_CMD_WRITE_MCG	 = 0x26, | 
|  | MLX4_CMD_MGID_HASH	 = 0x27, | 
|  |  | 
|  | /* miscellaneous commands */ | 
|  | MLX4_CMD_DIAG_RPRT	 = 0x30, | 
|  | MLX4_CMD_NOP		 = 0x31, | 
|  | MLX4_CMD_CONFIG_DEV	 = 0x3a, | 
|  | MLX4_CMD_ACCESS_MEM	 = 0x2e, | 
|  | MLX4_CMD_SET_VEP	 = 0x52, | 
|  |  | 
|  | /* Ethernet specific commands */ | 
|  | MLX4_CMD_SET_VLAN_FLTR	 = 0x47, | 
|  | MLX4_CMD_SET_MCAST_FLTR	 = 0x48, | 
|  | MLX4_CMD_DUMP_ETH_STATS	 = 0x49, | 
|  |  | 
|  | /* Communication channel commands */ | 
|  | MLX4_CMD_ARM_COMM_CHANNEL = 0x57, | 
|  | MLX4_CMD_GEN_EQE	 = 0x58, | 
|  |  | 
|  | /* virtual commands */ | 
|  | MLX4_CMD_ALLOC_RES	 = 0xf00, | 
|  | MLX4_CMD_FREE_RES	 = 0xf01, | 
|  | MLX4_CMD_MCAST_ATTACH	 = 0xf05, | 
|  | MLX4_CMD_UCAST_ATTACH	 = 0xf06, | 
|  | MLX4_CMD_PROMISC         = 0xf08, | 
|  | MLX4_CMD_QUERY_FUNC_CAP  = 0xf0a, | 
|  | MLX4_CMD_QP_ATTACH	 = 0xf0b, | 
|  |  | 
|  | /* debug commands */ | 
|  | MLX4_CMD_QUERY_DEBUG_MSG = 0x2a, | 
|  | MLX4_CMD_SET_DEBUG_MSG	 = 0x2b, | 
|  |  | 
|  | /* statistics commands */ | 
|  | MLX4_CMD_QUERY_IF_STAT	 = 0X54, | 
|  | MLX4_CMD_SET_IF_STAT	 = 0X55, | 
|  |  | 
|  | /* register/delete flow steering network rules */ | 
|  | MLX4_QP_FLOW_STEERING_ATTACH = 0x65, | 
|  | MLX4_QP_FLOW_STEERING_DETACH = 0x66, | 
|  | MLX4_FLOW_STEERING_IB_UC_QP_RANGE = 0x64, | 
|  |  | 
|  | /* Update and read QCN parameters */ | 
|  | MLX4_CMD_CONGESTION_CTRL_OPCODE = 0x68, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | MLX4_CMD_TIME_CLASS_A	= 60000, | 
|  | MLX4_CMD_TIME_CLASS_B	= 60000, | 
|  | MLX4_CMD_TIME_CLASS_C	= 60000, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | /* virtual to physical port mapping opcode modifiers */ | 
|  | MLX4_GET_PORT_VIRT2PHY = 0x0, | 
|  | MLX4_SET_PORT_VIRT2PHY = 0x1, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | MLX4_MAILBOX_SIZE	= 4096, | 
|  | MLX4_ACCESS_MEM_ALIGN	= 256, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | /* Set port opcode modifiers */ | 
|  | MLX4_SET_PORT_IB_OPCODE		= 0x0, | 
|  | MLX4_SET_PORT_ETH_OPCODE	= 0x1, | 
|  | MLX4_SET_PORT_BEACON_OPCODE	= 0x4, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | /* Set port Ethernet input modifiers */ | 
|  | MLX4_SET_PORT_GENERAL   = 0x0, | 
|  | MLX4_SET_PORT_RQP_CALC  = 0x1, | 
|  | MLX4_SET_PORT_MAC_TABLE = 0x2, | 
|  | MLX4_SET_PORT_VLAN_TABLE = 0x3, | 
|  | MLX4_SET_PORT_PRIO_MAP  = 0x4, | 
|  | MLX4_SET_PORT_GID_TABLE = 0x5, | 
|  | MLX4_SET_PORT_PRIO2TC	= 0x8, | 
|  | MLX4_SET_PORT_SCHEDULER = 0x9, | 
|  | MLX4_SET_PORT_VXLAN	= 0xB | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | MLX4_CMD_MAD_DEMUX_CONFIG	= 0, | 
|  | MLX4_CMD_MAD_DEMUX_QUERY_STATE	= 1, | 
|  | MLX4_CMD_MAD_DEMUX_QUERY_RESTR	= 2, /* Query mad demux restrictions */ | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | MLX4_CMD_WRAPPED, | 
|  | MLX4_CMD_NATIVE | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * MLX4_RX_CSUM_MODE_VAL_NON_TCP_UDP - | 
|  | * Receive checksum value is reported in CQE also for non TCP/UDP packets. | 
|  | * | 
|  | * MLX4_RX_CSUM_MODE_L4 - | 
|  | * L4_CSUM bit in CQE, which indicates whether or not L4 checksum | 
|  | * was validated correctly, is supported. | 
|  | * | 
|  | * MLX4_RX_CSUM_MODE_IP_OK_IP_NON_TCP_UDP - | 
|  | * IP_OK CQE's field is supported also for non TCP/UDP IP packets. | 
|  | * | 
|  | * MLX4_RX_CSUM_MODE_MULTI_VLAN - | 
|  | * Receive Checksum offload is supported for packets with more than 2 vlan headers. | 
|  | */ | 
|  | enum mlx4_rx_csum_mode { | 
|  | MLX4_RX_CSUM_MODE_VAL_NON_TCP_UDP		= 1UL << 0, | 
|  | MLX4_RX_CSUM_MODE_L4				= 1UL << 1, | 
|  | MLX4_RX_CSUM_MODE_IP_OK_IP_NON_TCP_UDP		= 1UL << 2, | 
|  | MLX4_RX_CSUM_MODE_MULTI_VLAN			= 1UL << 3 | 
|  | }; | 
|  |  | 
|  | struct mlx4_config_dev_params { | 
|  | uint16_t	vxlan_udp_dport; | 
|  | uint8_t	rx_csum_flags_port_1; | 
|  | uint8_t	rx_csum_flags_port_2; | 
|  | }; | 
|  |  | 
|  | enum mlx4_en_congestion_control_algorithm { | 
|  | MLX4_CTRL_ALGO_802_1_QAU_REACTION_POINT = 0, | 
|  | }; | 
|  |  | 
|  | enum mlx4_en_congestion_control_opmod { | 
|  | MLX4_CONGESTION_CONTROL_GET_PARAMS, | 
|  | MLX4_CONGESTION_CONTROL_GET_STATISTICS, | 
|  | MLX4_CONGESTION_CONTROL_SET_PARAMS = 4, | 
|  | }; | 
|  |  | 
|  | struct mlx4_dev; | 
|  |  | 
|  | struct mlx4_cmd_mailbox { | 
|  | void		       *buf; | 
|  | dma_addr_t		dma; | 
|  | }; | 
|  |  | 
|  | int __mlx4_cmd(struct mlx4_dev *dev, uint64_t in_param, uint64_t *out_param, | 
|  | int out_is_imm, uint32_t in_modifier, uint8_t op_modifier, | 
|  | uint16_t op, unsigned long timeout, int native); | 
|  |  | 
|  | /* Invoke a command with no output parameter */ | 
|  | static inline int mlx4_cmd(struct mlx4_dev *dev, uint64_t in_param, | 
|  | uint32_t in_modifier, | 
|  | uint8_t op_modifier, uint16_t op, | 
|  | unsigned long timeout, | 
|  | int native) | 
|  | { | 
|  | return __mlx4_cmd(dev, in_param, NULL, 0, in_modifier, | 
|  | op_modifier, op, timeout, native); | 
|  | } | 
|  |  | 
|  | /* Invoke a command with an output mailbox */ | 
|  | static inline int mlx4_cmd_box(struct mlx4_dev *dev, uint64_t in_param, | 
|  | uint64_t out_param, | 
|  | uint32_t in_modifier, uint8_t op_modifier, | 
|  | uint16_t op, | 
|  | unsigned long timeout, int native) | 
|  | { | 
|  | return __mlx4_cmd(dev, in_param, &out_param, 0, in_modifier, | 
|  | op_modifier, op, timeout, native); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Invoke a command with an immediate output parameter (and copy the | 
|  | * output into the caller's out_param pointer after the command | 
|  | * executes). | 
|  | */ | 
|  | static inline int mlx4_cmd_imm(struct mlx4_dev *dev, uint64_t in_param, | 
|  | uint64_t *out_param, | 
|  | uint32_t in_modifier, uint8_t op_modifier, | 
|  | uint16_t op, | 
|  | unsigned long timeout, int native) | 
|  | { | 
|  | return __mlx4_cmd(dev, in_param, out_param, 1, in_modifier, | 
|  | op_modifier, op, timeout, native); | 
|  | } | 
|  |  | 
|  | struct mlx4_cmd_mailbox *mlx4_alloc_cmd_mailbox(struct mlx4_dev *dev); | 
|  | void mlx4_free_cmd_mailbox(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox); | 
|  |  | 
|  | uint32_t mlx4_comm_get_version(void); | 
|  | int mlx4_set_vf_mac(struct mlx4_dev *dev, int port, int vf, uint64_t mac); | 
|  | int mlx4_set_vf_vlan(struct mlx4_dev *dev, int port, int vf, uint16_t vlan, | 
|  | uint8_t qos); | 
|  | int mlx4_set_vf_rate(struct mlx4_dev *dev, int port, int vf, int min_tx_rate, | 
|  | int max_tx_rate); | 
|  | int mlx4_set_vf_spoofchk(struct mlx4_dev *dev, int port, int vf, bool setting); | 
|  | int mlx4_get_vf_config(struct mlx4_dev *dev, int port, int vf, struct ifla_vf_info *ivf); | 
|  | int mlx4_set_vf_link_state(struct mlx4_dev *dev, int port, int vf, int link_state); | 
|  | int mlx4_config_dev_retrieval(struct mlx4_dev *dev, | 
|  | struct mlx4_config_dev_params *params); | 
|  | void mlx4_cmd_wake_completions(struct mlx4_dev *dev); | 
|  | void mlx4_report_internal_err_comm_event(struct mlx4_dev *dev); | 
|  | /* | 
|  | * mlx4_get_slave_default_vlan - | 
|  | * return true if VST ( default vlan) | 
|  | * if VST, will return vlan & qos (if not NULL) | 
|  | */ | 
|  | bool mlx4_get_slave_default_vlan(struct mlx4_dev *dev, int port, int slave, | 
|  | uint16_t *vlan, uint8_t *qos); | 
|  |  | 
|  | #define MLX4_COMM_GET_IF_REV(cmd_chan_ver) (uint8_t)((cmd_chan_ver) >> 8) | 
|  | #define COMM_CHAN_EVENT_INTERNAL_ERR (1 << 17) |